High Strength Steel Plate

alform®

High Strength and Ultra high Strength Sheet and Plate

steels are thermo-mechanically rolled, weldable fine grain structural steels with excellent cold-forming behaviour, perfect for applications wherever high plasticity coupled with high strength and light-weight design are in demand.

The central objective in light-weight design is to achieve

• High-performance parts with decreased material thicknesses
• Increased strength with unchanged dimensions

Benefits in detail

Replacing conventional structural steels with High-Strength and Ultra-High-Strength steels results in unchanged load capacities while achieving a reduction in material thickness of up to 70%. Significant thickness reductions are possible even under difficult load conditions, making High Strength and Ultra-High-Strength steels the key to successful light-weight design. Reduced material thicknesses and lower weights lead to cost-effective production and lower operating costs.

Product Benefits:

• Higher lifting and load capacity
• Optimized workability
• Higher wear resistance
• Reduced costs
• Improved environmental compatibility
• Increased payload
• Excellent cold formability
• Edging radii smaller than those of standard steels of comparable strength
• Excellent weldability
• Amount of pre-heating either reduced or completely eliminated
• Clean surface resulting from fine and homogeneous secondary scale
• Lower fuel consumption

Areas of application:

Dump Trucks, Mobile Cranes, Loaders, Industrial Trucks, Bulldozers, Excavators, Forestry Machinery, Buckets, Cranes, Port Equipment and Lifting Equipment.

alform® 700M

2mm to 12mm

• Yield strength: min 700 MPa
• Tensile Strength: min 750 – max 930 MPa

8mm to 15mm

• Yield strength: min 700 MPa
• Tensile strength: min 770 – max 1050 Mpa

15mm to 50mm

• Yield strength: min 680 MPa
• Tensile strength: min 770 max 1050 MPa

50mm to 60mm

• Yield strength: min 650 MPa
• Tensile strength: min 770 max 1050 MPa

Dimensional range Sheet:

• Minimum width 900mm and Maximum Length 12,000mm
• 2mm - Max width 1300mm
• 3mm - Max width 1500mm
• 4mm to 12mm - max width 1600mm

Dimensional range Plate:

• Minimum width 1500mm and Maximum Length 12,750mm
• 8mm to 60mm - Max width 2500mm

• alform high-strength sheets brochure
• alform x-treme ultra high strength brochure

• Abrasion Resistant Steel Plate

• Aluminium

• Black Carbon Bar

• Bright Mild Steel

• Cast Iron Bar

• Chrome Bar

• Cold Drawn Seamless Steel Tubes

• Drill Rods

• Heat Exchange Tubes

• High Strength Fine Grain Steel Plate

• High Tensile Alloy Steel

• Hollow Bar

• Hydraulic Cylinder Tube

• Hydraulic Line Tubes

• Stainless Steel Wire